Bambu Lab
Guides for Bambu Lab’s A1, A1 mini, P1P, P1S, P2S, X1 Carbon, H2D, H2S and X2D. Most models have the full run: unboxing, first print, calibration, filament loading, maintenance and nozzle swaps. Each one also has an HMS error index, which is usually the fastest place to start when the screen shows a code you don’t recognize. AMS and AMS lite setup pages are here too.
Bambu Studio 2.8.2: What Actually Changes for Your Prints
Bambu Studio 2.8.2 left beta on August 14. The assembly guide tool got the headlines, but the changes that show up in ordinary prints…
Bambu Lab X2D: Bambu Studio Setup
The X2D’s dual-nozzle toolhead means your slicer setup has an extra layer most Bambu guides don’t cover: assigning filament to a left and a…
Bambu Lab X2D: Loading, Unloading, and Changing Filament
The X2D loads filament through two separate nozzles with different mechanics, and the auxiliary side has real material limits. Here is how loading, unloading,…
Bambu Lab X2D: Bed Leveling and Calibration
The X2D levels its bed and homes its Z axis with a pair of eddy current sensors, one per nozzle, and adds a dedicated…
Bambu Lab X2D: First Print Walkthrough
The X2D swaps the X1 Carbon’s lidar for a pair of eddy current sensors and a dedicated offset sensor to calibrate its dual-nozzle toolhead.…
Bambu Lab X2D: Unboxing and Safe First Setup
Cut every zip tie you can see before you touch the power button, and don’t force the toolhead by hand until the transport screws…
Bambu Lab H2S: Bambu Studio Setup
A practical walkthrough of installing Bambu Studio, connecting an H2S over cloud or LAN Only Mode, and setting up its single-nozzle printer profile, AMS…
Bambu Lab H2S: Loading, Unloading and Changing Filament
Load, unload and change filament on a Bambu Lab H2S, including how its hub-free AMS connection works and what actually separates AMS HT from…
Bambu Lab H2S: Bed Leveling and Calibration
Level a Bambu Lab H2S’s bed with its heatbed force sensors and eddy current coil, and know when a nozzle swap, plate swap, or…
Bambu Lab H2S: First Print Walkthrough
A practical walkthrough of the Bambu Lab H2S’s first real print, from starting the job on a single-nozzle machine to what the chamber camera…
