QIDI
QIDI guides centered on the Q2: setup, first print, calibration, filament loading, Klipper settings, maintenance and nozzle replacement, plus the QIDI Box multicolor unit. The Q1 Pro, Plus4, X-Max 3, Q2C and MAX4 each have an error-code index.
QIDI Q1 Pro Error Code Index
A look at the fault messages QIDI documents for the Q1 Pro, and an honest account of how thin that documentation actually is compared…
QIDI Plus 4 Error Code Index
A reference to the fault messages and troubleshooting steps QIDI has published for the Plus 4 (X-Plus4), including the current state of its QDC…
QIDI X-Max3 Error Message Index
QIDI does not publish a numbered fault code table for the X-Max3. What the official wiki has is a small set of plain Klipper…
QIDI Q2C Error Message Index
A guide to the QIDI Q2C’s on-screen error and warning messages, built from QIDI’s own wiki and support pages rather than a formal numbered…
QIDI MAX4 Error Code Index
The MAX4 uses QIDI’s QDC (QIDI Diagnostic Center) framework, the numbered-alert system on QIDI’s newer machines, rather than the older QDE codes documented for…
QIDI Box for the QIDI Q2, what it does and how to get started
What the QIDI Box adds to a Q2, which filaments it can and can’t run, and what to check before connecting one.
QIDI Q2 error and alert code index
What QIDI has documented so far for Q2 error and alert conditions, what triggers each one, and how to clear it.
QIDI Q2 nozzle replacement
Replace a worn nozzle on the QIDI Q2, work the silicone sock off safely, and torque the new nozzle in while the hotend is…
QIDI Q2 maintenance schedule
Follow QIDI’s maintenance schedule for the Q2, covering lead screw and linear rail lubrication, fan cleaning, and nozzle and hotend care intervals.
QIDI Q2 slicer and printer-profile setup for Klipper, OrcaSlicer and PrusaSlicer
Set up QIDI Studio on the QIDI Q2, from first launch through slicing and sending a print, and see why its Klipper firmware also…
