Intermediate
ABS Print Settings: Bed Temp, Nozzle Temp and Enclosure
ABS nozzle, bed, enclosure and fan settings for warp-free prints, including why the cooling fan runs opposite to PLA.
Fix Extruder Clicking: Trace the Sound to the Cause
Hear a rhythmic click or skip from your extruder? Work through spool, tension, temperature, and clog checks to find the real cause.
Fix ABS Warping
ABS shrinks far more than PLA or PETG as it cools. Here is the bed temperature, enclosure, and adhesion routine that actually stops corners…
How to Cold Pull a 3D Printer Nozzle the Right Way
A step-by-step guide to performing a cold pull correctly: the right filament, the heat-cool-pull sequence, safe temperatures, and how to tell it worked.
PLA Print Settings: Bed Temp, Nozzle Temp and Speed
PLA is the most forgiving common filament to print, but the settings that make it forgiving are specific to PLA and do not carry…
Fix PLA Warping: A Real but Uncommon Signal Worth Double-Checking
PLA shrinks the least of the common filaments, so warping usually points to bed temperature, enclosure heat or a disguised issue.
Fix PETG Warping: When Strong Adhesion Still Is Not Enough
Work out why PETG can still warp despite sticking aggressively, without over-correcting into elephant’s foot or a damaged plate.
Fix Resin Print Layer Lines: Misalignment, Not Ordinary Texture
Work out whether visible resin layer lines come from a wobbly Z axis, changed settings mid-print, or a shaky foundation.
Fix Blobs and Zits: Small Bumps From Retraction and the Seam
Trace small surface bumps to retraction, coasting or the seam before assuming the whole print is over-extruding.
Bambu Lab AMS 2 Pro setup for the P2S
How to set up an AMS 2 Pro with a Bambu Lab P2S, including the separate buffer requirement, PTFE tube routing and desiccant checks.
