Bambu Lab
Guides for Bambu Lab’s A1, A1 mini, P1P, P1S, P2S, X1 Carbon, H2D, H2S and X2D. Most models have the full run: unboxing, first print, calibration, filament loading, maintenance and nozzle swaps. Each one also has an HMS error index, which is usually the fastest place to start when the screen shows a code you don’t recognize. AMS and AMS lite setup pages are here too.
Bambu Lab P2S HMS error index
A guide to reading Bambu Lab P2S HMS error codes correctly, checking simple causes first, and knowing when to stop and contact support.
Bambu Lab P2S nozzle and hotend replacement
How to safely replace the nozzle and hotend on a Bambu Lab P2S, including nozzle compatibility notes and where to find Bambu’s official replacement…
Bambu Lab P2S maintenance: a practical schedule
A practical maintenance schedule for the Bambu Lab P2S, covering routine cleaning, the camera linked heatbed silkscreen, the carbon filter, and when to stop.
Bambu Studio profile setup for the P2S
Set up printer, nozzle, and material presets in Bambu Studio for the Bambu Lab P2S, including engineering filaments and enclosure-aware settings.
Loading and unloading filament on a Bambu Lab P2S
Load and unload filament on a Bambu Lab P2S from an external spool or AMS, with clean tips, correct mapping, and a full purge.
Bambu Lab P2S calibration: the useful routines
Run the right Bambu Lab P2S calibration routines, including bed leveling, flow tuning and the new eddy-current active flow calibration, without masking a hardware…
Bambu Lab P2S first print: settings worth checking
Check plate and filament settings in Bambu Studio, use the P2S live camera’s AI detection as a safety net, and judge the first layer…
Bambu Lab P2S setup: unpacking without missing a restraint
Set up a Bambu Lab P2S, clear its internal shipping restraints, place it correctly, connect an AMS 2 Pro if fitted, and complete the…
Bambu Lab AMS setup for the P1S
Connect and set up a Bambu Lab AMS with the P1S, install desiccant, route PTFE tubing and map four spool bays.
Bambu Lab AMS lite setup for the A1
Set up AMS lite for a Bambu Lab A1, route its four PTFE tubes, map spool slots and avoid bed-travel interference.
