Beginner
-
Your First 3D Print: A Beginner Checklist
Prepare the printer, load PLA, slice a small model and read the first layer without changing a dozen settings at once.
-
Essential 3D Printer Calibration, in the Right Order
Calibrate the mechanical foundation, first-layer gap, temperature and flow in an order that keeps one problem from hiding another.
-
First Layer Not Sticking: A Safe Diagnostic Sequence
Separate a dirty surface, an incorrect nozzle gap and unsuitable starting temperatures without random tuning.
-
Stop Corners Lifting: A Practical Warping Checklist
Fix the foundation, control drafts and add a brim only when the geometry needs one.
-
Fix Elephant Foot on 3D Prints
Reduce the swollen lower edge by correcting first-layer squish and heat before compensating in the model or slicer.