Slicer settings
Bambu Studio profile setup for the P2S
Set up printer, nozzle, and material presets in Bambu Studio for the Bambu Lab P2S, including engineering filaments and enclosure-aware settings.
Sovol SV08 slicer and printer-profile setup with Sovol-OrcaSlicer
Install Sovol’s own OrcaSlicer build for the SV08, match the right printer, filament and process presets to the nozzle in use, and see where…
QIDI Q2 slicer and printer-profile setup for Klipper, OrcaSlicer and PrusaSlicer
Set up QIDI Studio on the QIDI Q2, from first launch through slicing and sending a print, and see why its Klipper firmware also…
Orca-Flashforge slicer setup for multicolor AD5X printing
How to set up Orca-Flashforge for the AD5X, choose the correct printer profile, configure the four IFS filament slots, and pick safe speeds for…
Orca-Flashforge slicer setup for the Adventurer 5M
How to set up Orca-Flashforge for the Adventurer 5M, including the right printer profile, build volume, nozzle size, and safe starting speeds.
Photon Workshop setup for the Anycubic Photon Mono 4
Install Anycubic Photon Workshop, add the Photon Mono 4 printer profile and set the basic exposure values before slicing a first resin file.
Anycubic Slicer Next setup for the Kobra 3
Set up Anycubic Slicer Next for a Kobra 3 with the correct printer profile, nozzle diameter and build volume before the first real print.
PrusaSlicer profile setup for the CORE One
Configure PrusaSlicer for the CORE One with the exact nozzle, sheet and filament profile, then inspect BG-code before printing.
Creality Print and OrcaSlicer setup for the K1C
Set up a Creality K1C slicer profile with the exact machine revision, nozzle, plate and conservative material baseline.
Bambu Studio profile setup for the P1S
Configure Bambu Studio for a P1S with the correct nozzle, plate, filament mapping and enclosure-aware material settings.
